| Issue Number : 3412

Govt. Issues New Regulation on Excise Settlements

With the ultimate objective of ensuring legal certainty, the Minister of Finance (“Minister”) has issued Regulation of the Minister No. 68/PMK.04/2018 on Excise Settlements (“Regulation 68/2018”). Regulation 68/2018 serves as a set of guidelines for the implementation of excise settlement methods within Indonesia.[1]
 
Previously, these matters were addressed under Regulation of the Minister No. 108/PMK.04/2008 on Excise Settlements, which has been amended three times, most recently through the issuance of Regulation of the Minister No. 15/PMK.04/2015 (“Previous Regulations”).
 
In general, Regulation 68/2018 codifies the various provisions originally set out under the Previous Regulations, with only minor changes being made.
 
 
Excise Settlement Methods
Regulation 62/2018 requires excise for any excisable goods which are produced in/imported into Indonesia to be settled when the relevant goods are either being imported to or collected from factories/warehouses.[2]
 
Said excise settlements are to be undertaken through the application of any of the following methods:
 
  1. Payments;
  2. Affixation of excise bands; or
  3. Affixation of other excise settlement marks.
 
Settlement by Payments
This settlement method involves the payment of excise fees prior to the relevant excisable goods being collected/removed from the following locations: 1) Factories; 2) Warehouses; 3) Temporary storage areas; or 4) Bonded storage areas.[3]
 
However, it should be noted that this settlement method is only applicable to settlements which involve excise for ethyl alcohol (“EA”) and beverages containing EA up to a maximum level of 5% (“Alcoholic Beverages”).[4] Details relating to this type of settlement are elaborated upon in the following table:
 
Excisable Goods
Notes
Domestically produced EA and Alcoholic Beverages
  1. Settlements must utilize excise settlement payment documents which contain the following information at the least:
  1. Company identity;
  2. Amount and type of excisable goods; and
  3. Amount of payable excise (this provision was not previously incorporated).
  1. Payments are to be undertaken in cash via receiving banks (bank persepsi) or posts on the same date as the relevant excise settlement document which is the basis for the payment.
Imported EA
  1. Settlements must utilize customs documents, as regulated under prevailing customs laws and regulations (this provision was not incorporated under the Previous Regulations).
  2. Payments are to be undertaken via foreign exchange receiving banks (bank devisa persepsi) or posts.
 
 
Settlement by the Affixation of Excise Bands
This settlement method involves the attaching of excise bands to excisable goods prior to the relevant goods are being collected/removed from the following locations: 1) Factories; 2) Temporary storage areas; 3) Bonded storage areas; and 4) Excisable goods manufacturing locations overseas.[5]
 
However, it should also be noted that this settlement method is only available for settlements which involve the following goods:[6]
  1. Domestically produced Alcoholic Beverages;
  2. Imported Alcoholic Beverages; and
  3. Tobacco products.
 
Details relating to the attachment of excise bands and related settlements are elaborated upon in the table below:
 
Excised Goods
Details
Alcoholic Beverages[7]
  1. The affixation of excise bands is to be undertaken in the following locations:
  1. In factories (for domestically produced Alcoholic Beverages and tobacco products); and
  2. At manufacturing locations for excisable goods which are located overseas, in temporary storage areas or in bonded storage areas (for imported Alcoholic Beverages and tobacco products).
  1. The affixed excise bands must satisfy the following criteria (“Band Criteria”):
  1. Must be intact, unbroken and/or brand new;
  2. Must be in accordance with the relevant excise tariffs and alcohol levels; and so forth
  1. Should the above Band Criteria not be met, then the relevant excise will be considered unsettled.
Tobacco products[8]
 
In order to obtain excise bands, manufacturers and importers (“Businesses”) are first required to apply for the provision of excise bands from the relevant customs and excise office using Alcoholic Beverages/tobacco products excise documents which contain at least the following information: 1) Company identity; 2) Amount of excise bands; and 3) Excise tariff. After this stage has been completed, Businesses may then order the relevant Alcoholic Beverage/tobacco product excise bands from the customs and excise office.[9]
 
Payments for orders of excise bands are to be completed in cash through receiving banks or posts on the same date as that printed on the excise documents which are the basis for the payment.[10]
 
It is important to note that if Businesses are unable to use all of their ordered excise bands prior to the end of the relevant year, then they will have to meet the relevant excise band replacement costs for any unused excise bands for the following year’s production.[11]
 
 
Settlement by Affixation of Other Excise Settlement Marks
This settlement method involves the attaching of excise settlement marks other than those mentioned above in accordance with the prevailing excise laws and regulations for excisable goods prior to their collection/removal from the following locations: 1) Factories; 2) Temporary storage areas; 3) Bonded storage areas; and 4) Excisable goods manufacturing locations overseas.[12]
 
 
Regulation 68/2018 has been in force since 5 July 2018 and repeals and replaces the Previous Regulations. ss
 

[1] Art. 3 (1), Regulation 68/2018.
[2] Art. 2, Regulation 68/2018.
[3] Art. 3 (2), Regulation 68/2018.
[4] Art. 4 (1), Regulation 68/2018.
[5] Art. 3 (3), Regulation 68/2018.
[6] Art. 5, Regulation 68/2018.
[7] Art. 6, Regulation 68/2018.
[8] Art. 7, Regulation 68/2018.
[9] Arts. 8 (2-3) and 9 (2-3), Regulation 68/2018.
[10] Art. 10, Regulation 68/2018.
[11] Arts. 8 (4) and 9 (4), Regulation 68/2018.
[12] Art. 3 (4), Regulation 68/2018.
...

Subscribe to read more legal analysis.

Hukumonline Pro Intelligence

Platform AI hukum terpercaya sebagai solusi komprehensif riset Anda

professionalprofessionalProfessional Solutions
professionalprofessionalUniversity Solutions
*Syarat dan ketentuan berlaku
With the ultimate objective of ensuring legal certainty, the Minister of Finance (“Minister”) has issued Regulation of the Minister No. 68/PMK.04/2018 on Excise Settlements (“Regulation 68/2018”). Regulation 68/2018 serves as a set of guidelines for the implementation of excise settlement methods within Indonesia.[1]
 
Previously, these matters were addressed under Regulation of the Minister No. 108/PMK.04/2008 on Excise Settlements, which has been amended three times, most recently through the issuance of Regulation of the Minister No. 15/PMK.04/2015 (“Previous Regulations”).
 
In general, Regulation 68/2018 codifies the various provisions originally set out under the Previous Regulations, with only minor changes being made.
 
 
Excise Settlement Methods
Regulation 62/2018 requires excise for any excisable goods which are produced in/imported into Indonesia to be settled when the relevant goods are either being imported to or collected from factories/warehouses.[2]
 
Said excise settlements are to be undertaken through the application of any of the following methods:
 
  1. Payments;
  2. Affixation of excise bands; or
  3. Affixation of other excise settlement marks.
 
Settlement by Payments
This settlement method involves the payment of excise fees prior to the relevant excisable goods being collected/removed from the following locations: 1) Factories; 2) Warehouses; 3) Temporary storage areas; or 4) Bonded storage areas.[3]
 
However, it should be noted that this settlement method is only applicable to settlements which involve excise for ethyl alcohol (“EA”) and beverages containing EA up to a maximum level of 5% (“Alcoholic Beverages”).[4] Details relating to this type of settlement are elaborated upon in the following table:
 
Excisable Goods
Notes
Domestically produced EA and Alcoholic Beverages
  1. Settlements must utilize excise settlement payment documents which contain the following information at the least:
  1. Company identity;
  2. Amount and type of excisable goods; and
  3. Amount of payable excise (this provision was not previously incorporated).
  1. Payments are to be undertaken in cash via receiving banks (bank persepsi) or posts on the same date as the relevant excise settlement document which is the basis for the payment.
Imported EA
  1. Settlements must utilize customs documents, as regulated under prevailing customs laws and regulations (this provision was not incorporated under the Previous Regulations).
  2. Payments are to be undertaken via foreign exchange receiving banks (bank devisa persepsi) or posts.
 
 
Settlement by the Affixation of Excise Bands
This settlement method involves the attaching of excise bands to excisable goods prior to the relevant goods are being collected/removed from the following locations: 1) Factories; 2) Temporary storage areas; 3) Bonded storage areas; and 4) Excisable goods manufacturing locations overseas.[5]
 
However, it should also be noted that this settlement method is only available for settlements which involve the following goods:[6]
  1. Domestically produced Alcoholic Beverages;
  2. Imported Alcoholic Beverages; and
  3. Tobacco products.
 
Details relating to the attachment of excise bands and related settlements are elaborated upon in the table below:
 
Excised Goods
Details
Alcoholic Beverages[7]
  1. The affixation of excise bands is to be undertaken in the following locations:
  1. In factories (for domestically produced Alcoholic Beverages and tobacco products); and
  2. At manufacturing locations for excisable goods which are located overseas, in temporary storage areas or in bonded storage areas (for imported Alcoholic Beverages and tobacco products).
  1. The affixed excise bands must satisfy the following criteria (“Band Criteria”):
  1. Must be intact, unbroken and/or brand new;
  2. Must be in accordance with the relevant excise tariffs and alcohol levels; and so forth
  1. Should the above Band Criteria not be met, then the relevant excise will be considered unsettled.
Tobacco products[8]
 
In order to obtain excise bands, manufacturers and importers (“Businesses”) are first required to apply for the provision of excise bands from the relevant customs and excise office using Alcoholic Beverages/tobacco products excise documents which contain at least the following information: 1) Company identity; 2) Amount of excise bands; and 3) Excise tariff. After this stage has been completed, Businesses may then order the relevant Alcoholic Beverage/tobacco product excise bands from the customs and excise office.[9]
 
Payments for orders of excise bands are to be completed in cash through receiving banks or posts on the same date as that printed on the excise documents which are the basis for the payment.[10]
 
It is important to note that if Businesses are unable to use all of their ordered excise bands prior to the end of the relevant year, then they will have to meet the relevant excise band replacement costs for any unused excise bands for the following year’s production.[11]
 
 
Settlement by Affixation of Other Excise Settlement Marks
This settlement method involves the attaching of excise settlement marks other than those mentioned above in accordance with the prevailing excise laws and regulations for excisable goods prior to their collection/removal from the following locations: 1) Factories; 2) Temporary storage areas; 3) Bonded storage areas; and 4) Excisable goods manufacturing locations overseas.[12]
 
 
Regulation 68/2018 has been in force since 5 July 2018 and repeals and replaces the Previous Regulations. ss
 

[1] Art. 3 (1), Regulation 68/2018.
[2] Art. 2, Regulation 68/2018.
[3] Art. 3 (2), Regulation 68/2018.
[4] Art. 4 (1), Regulation 68/2018.
[5] Art. 3 (3), Regulation 68/2018.
[6] Art. 5, Regulation 68/2018.
[7] Art. 6, Regulation 68/2018.
[8] Art. 7, Regulation 68/2018.
[9] Arts. 8 (2-3) and 9 (2-3), Regulation 68/2018.
[10] Art. 10, Regulation 68/2018.
[11] Arts. 8 (4) and 9 (4), Regulation 68/2018.
[12] Art. 3 (4), Regulation 68/2018.
...

Subscribe to read more legal analysis.

Hukumonline Pro Intelligence

Platform AI hukum terpercaya sebagai solusi komprehensif riset Anda

professionalprofessionalProfessional Solutions
professionalprofessionalUniversity Solutions
*Syarat dan ketentuan berlaku
2026 Hak Cipta Milik Hukumonline.com
Cookies Info